Canada Plastic Pipes and Fitting Market Outlook to 2022: Ken Research


The report titled Canada Plastic Pipes and Fitting Market Outlook to 2022 – By PVC, UPVC, CPVC, PE (HDPE, MDPE, LDPE, PEX), PP, ABS, PVDF, PB Pipes, By Application (Water Supply and Sewage, Plumbing, Chemical, and Oil & Gas and Irrigation provides a comprehensive analysis of the Canada plastic pipe and fittings market. The report covers various aspects including introduction to Canada plastic pipe and fitting market size, major players, market segmentation by Type of Pipe (PVC, PE, Others), Market Segmentation by End User Application (Irrigation, Water Supply and Sewage, Plumbing, Chemical, Oil & Gas and Mining and Others), growth drivers, restraints, key regulations, future outlook and analyst recommendations.

Market Size

Canada plastic pipe and the fitting market is in its growth stage, witnessing consolidation with players increasing their market penetration through inorganic growth. The market has registered a single digit five-year CAGR from 2012 to 2017. The demand for plastic pipes and fittings is highly correlated with the investment of government on infrastructural, mining and agricultural activities and the demand for house dwellings in the country. Improvements in technology and plastic materials have helped plastic pipe increase its share in agriculture, and industrial sectors in Canada. The period witnessed an increase in usage of pipe relining technology. In this technology, old pipes mostly water supply and sewage pipes were refurbished by inserting PE pipes inside the already existing pipes. This allows the refurbishment process to happen without causing any major disruption in the infrastructure. The growth of this technology has resulted in an increase in demand for plastic pipes especially HDPE pipes in the market.

Market Segmentation

By Type of Pipes

The market is segmented into PVC, PE, and Others (plastic pipes such as ABS, PP, PVDF, and PB). In 2017, uPVC pipes had the largest market share as they are less costly then PE pipes and are widely used in various sectors such as water pipelines and sewage pipelines. In the PE segment, HDPE constitutes majority share in Canada. In other product segments, ABS-DWV (drain, waste, and vent) piping is used in single-family homes and general wood-frame construction. Durability, ease of installation and overall value of ABS in providing a plumbing drain system has made builders and contractors opt for this type of pipe.

By Market Structure

Manufacturers such as IPEX, ISCO, Uponor Infra, ADS, Aqua Q, Dura-Line are some of the players in organized sector manufacturing high-grade plastic pipes. They have a strong presence in various regions and have the partnership with all the major plastic pipes distributors and retailers in the country. The players in the unorganized market mostly manufacture limited products and would focus on a particular type of plastic pipes either PVC only or PE only and/or import other types of pipes and fittings from USA and Mexico in which they can exercise higher margins.

By Geographical Regions

The eastern Canada region accounted for the majority of the share because of the increased demand for house dwelling units in past few years and also due to the surging expenditure on various infrastructural and developmental activities and presence of various end-user industries. Most of the oil and gas industries in Canada are located near Alberta region as most of the oil reserves are located in this region. This is has resulted in huge demand for plastic pipes from oil and gas industries in Western Canada. In the Atlantic region, there was an influx of immigrant in this region leading to increases in population, which gave the boost to the construction activities in this region. Between 2016 and 2017, the population of Prince Edward Island increased to 150,000 marks for the first time.

By End-User Application

Most of the plastic pipes and fittings in Canada are used for water supply and sewage systems. UPVC and HDPE pipes are preferred by the government as they are comparatively low in cost as compared to steel and iron pipes. Plumbing which has the second highest share in the market has started using PEX pipes. Canada has been using copper pipes for plumbing application for years. However, in the last few years, PEX pipes have come up as a viable option to replace copper piping systems in certain applications. Polyethylene pipes have become the accepted standard for mining applications such as Solution Mining, Heap Leaching, Process Water, Process Slurry, Dust Suppression, Mine Dewatering. HDPE pipe has the toughness, structural performance, and resistance to abrasion and chemicals to withstand the unique stresses of mining applications.

Competition Scenario

The competition of the market is currently moving toward consolidation with major players eyeing at increasing market penetration through strategic partnerships or merger and acquisitions. IPEX, ISCO, Uponor Infra, ADS, Aqua Q, Dura-Line are some of the biggest manufacturers of plastic pipes and fittings in the country. Within the organized players, the price of the product tends to remain close to the industry prices and the manufacturers compete more on the basis of quality of the products and product availability in the wholesale and retail outlets and product customization at the time of bulk orders, whereas The unorganized players compete on the basis of price and the availability of the product in the retail and wholesale stores.

Future Outlook

The future outlook of the industry is positive with an estimated market size to grow at a CAGR of the single digit from 2017 to 2022. It is anticipated that the PE pipes will grow at the fastest pace among all the types of plastic pipes, due to the increase in acceptability across various other applications. The use of PVC pipes is expected to reduce due to substitution by other types of plastic pipes specifically PE pipes.

 Key Segments Covered

By End User Application:

  • Water Supply and Sewage
  • Irrigation
  • Plumbing
  • Chemical, Oil & Gas, Mining and Industrial
  • Others (Cable Protection, HVAC and other related industries)

By Type of Pipes:

  • PVC (CPVC and UPVC)
  • Polyethylene (PE) (HDPE, MDPE, LDPE)
  • Others (Include Polypropylene pipes, ABS, Polyvinylidene fluoride (PVDF), PB Etc.)

By Type of Market Structure

  • Organized Sector
  • Unorganized Sector

Key Target Audience

  • Plastic Resin Suppliers
  • Plastic Pipe and Fitting Manufacturing Companies
  • Oil and Gas Industry
  • Government Bodies
  • Real Estate developers
  • Agriculture Sector Companies

 Time Period Captured in the Report:

2012-2017 – Historical Period

2017-2022 – Future Forecast

Major Companies Covered:

IPEX Piping Systems, ISCO, Uponor Infra, ADS, Aqua Q, Polytubes, Dura-Line, CanPlas Plastics, Royal Building Products, Zenith Plastics, Rezplast Manufacturing Ltd, PVC Industrial Products Next Polymer and Bow Plastic and others

 Key Topics Covered in the Report

  • Overview of Canada Plastic Pipe and Fitting Market.
  • Value chain analysis.
  • Canada Plastic Pipe and Fitting Market Size by Revenue.
  • Major Players in the Canada Plastic Pipe and Fitting Market.
  • Market Segmentation by Type of Pipe (PVC, PE, and Others) and By End-User Application (Irrigation, Water Supply and Sewage, Plumbing, Chemical, Oil & Gas and Mining and Others)
  • Government Regulations and Standards.
  • Growth Drivers and Restraints
  • Company profile of Major Manufacturers (IPEX Piping Systems, ISCO, Uponor Infra, ADS, Aqua Q, Polytubes, Dura-Line, CanPlas Plastics, Royal Building Products, Zenith Plastics, Rezplast Manufacturing Ltd, PVC Industrial Products Next Polymer and Bow Plastic and others)
  • Export and Import Scenario in Canada Plastic Pipes and Fittings Market
  • Growth Drivers and Trends
  • Future Outlook
  • Analyst Recommendation.

To Know More, Click On the link below:-

Related Reports:-

Contact Us:-

Ken Research

Ankur Gupta, Head Marketing & Communications



Comments are closed.